O Ring Manufacturers in Pune, Rubber O Ring Manufacturers in Pune
Shree Datta Deep Rubber Product is well-known O Ring manufacturers, suppliers, dealers in Pune. offer high performance, precision customization sealing solution at affordable prices in Pune. We ensure durable, chemical-resistant, and temperature-tolerant O-rings for automotive, industrial, and pharmaceutical applications. We work with the finest materials, whether NBR to resist oil or Viton to perform against chemicals and create them with the quality standards of ISO 9001 in Pune itself.
O Ring Manufacturers in Pune for Industrial Application
What is O Ring?
O Rings are simple and important toroidal (ring-shaped) seals, typically of an elastomer (rubber) material such as NBR, Silicone, or Viton. They are made to fit into a groove and be crushed between two surfaces and provide a reliable, leak-proof seal against fluids (liquids or gases) under both non-moving (static) and moving (dynamic) conditions.
Types of O Ring:
As leading O ring manufacturers in Pune, we have mention types by materials,profile & application
-
By Material
- Nitrile (Buna-N): A general-purpose grade, suitable in oil, fuel and water.
- Fluorocarbon (FKM/Viton): It is highly resistant to high temperatures and most chemicals.
- Silicone: This has a very high resistance to extreme temperatures but it is not resistant to oils.
- EPDM (Ethylene Propylene Diene Monomer): Weather, ozone and steam resistant.
- PTFE (Polytetrafluoroethylene/Teflon): a rigid compound that is highly chemical inert and has low frictional values and commonly utilized at extreme temperatures.
-
By Profile
- Standard O-Ring: O ring dealers in Pune is the most prevalent one with a standard cross-section which is circular in metal o rings.
- Encapsulated O-Ring: This is a type of core consisting of a standard elastomer, such as Viton or Nitrile, which is covered with a coating of PTFE to increase chemical resistance and sealing.
- Cord Ring: O-ring cord that can be cut when necessary to fit the desired size seal to be applied to use.
-
By Application
- Static O-Ring: The use is done between the two surfaces that do not move in relation to one another for o ring suppliers in Pune.
- Dynamic O-Ring: Between parts that move, the materials are stronger and wear-resistant, and they are needed more often
Features of O Ring
- Simple Design and Compact Design: The round cross-section facilitates the ease of manufacture and the design allows easy installation in standardized grooves. Rubber O ring results in reduced production cost and a shorter time spent in replacement in the case of maintenance.
- High Pressure Capability: O ring kit can be effectively used to maintain a system that has a very high pressure of operation particularly when combined with plain backup rings. Silicon O rings render them suitable to the strenuous hydraulics and heavy machinery.
- Various Sealing Applications: These can be used in either a non-moving or a moving sealing application. O ring manufacturers in Pune broad flexibility enables engineers to apply one trust-worthy product in a large number of designs.
- Broad Line of Materials: NBR, EPDM, FKM (Viton), and Silicone are all available and can withstand oils, acids, chemicals and extreme temperatures. Rubber Viton o ring makes sure that you have always had the right seal to your own fluid environment.
- Cost-Effective Solution: It is extremely cheap and fast to install compared to complex mechanical seals, and best sealing performance per rupee. Green Viton O Ring deemphasize overall assembly time and cost of operations in the long-term.
Applications of O Ring
Serve as o ring dealers in Pune, it is applicable in different system which has given below.
- Hydraulic and Pneumatic Cylinders: O ring manufacturers in Pune seal the gap between the piston/rod and the wall of the cylinder, and support the pressure pressurized fluid or air to not escape.
- Automotive Engines and Systems: Generally used to seal oil pans, engine covers, fuel injectors, and other fluid lines to ensure that lubricants and fuel do not leak out. The fact that they resist high temperatures is essential to the safe and long-performing engine performance.
- Pumps and Valves: Pumps and control valves that contain water, chemicals, or slurries need pumps and valves to seal connections and shafts. These make sure that media is fixed and nothing gets contaminated to the outside environment.
- Industrial Piping & Flanges: Industrial piping and flanges are used to form a tight stationary seal between flanges on the pipe, which links various parts of industrial pipelines. This is very important in the chemical plants and refineries to prevent leakage.
- Medical Equipment and Appliances: Medical equipment and appliances are used in various fluid and gaseous delivery systems where purity and non-toxicity are of utmost importance. O ring suppliers in Pune offer effective seals in the machinery such as dialysis machines and food processing plants.
Why Choose us for O Ring?
Serve as o ring dealers in Pune, it is applicable in different system which has given below.
- Certified by ISO 9001:2015: O ring manufacturers in Pune produce all our products in accordance with international quality standards of management.
- Technical Know-How: With the total technical knowledge, we assist you in choosing the right material and size to use.
- High Quality, Economical: We will deliver globally famous quality components at a cost that is affordable to both and the global market.
Shree Datta Deep Rubber Product is one of the premier O Ring manufacturers, suppliers, dealers in Pune. We offer efficient, cost-effective and straightforward means of leak prevention in the static and dynamic systems. It can withstand high temperature, high pressure, and hostile chemicals, and it can resist them better, which is due to the choice of the material. Its modular construction allows easy maintenance of inventory and fast replacement of the product without any hassle in case of maintenance. Contact us for more details.
FAQs:
An O-ring is a gasket, traditionally in the form of a torus (doughnut) that is installed in a groove and clamped down during installation. It is employed to assure that two or more parts are not spilled out.
Standard specification (number based) systems (usually AS568 in the US or ISO 3601 globally) of O-ring sizes are typically defined based on the inner diameter and cross-sectional diameter (or cross-sectional thickness). This renders it to be interchangeable and suitable in special uses.